Special Offer: 20% Off Part Worn Tyres / £5 Off New Tyres for Emergency Service / Key Workers. Terms and Conditions Apply. Learn More
Bank Holiday Opening Hours: Monday 26th August 9:00am – 3:00pm
NOTICE: We will be operating from 9:00am to 3:00pm on Monday 19th September For The State Funeral Of Queen Elizabeth II
You may not have given it much thought, but the type of tyre you use on your automobile has a significant impact on how it handles in certain situations. Your wheels’ ability to make touch with the road is greatly influenced by everything from the material to the tyre tread.
Understanding tyre tread types is crucial before discussing the various tyre kinds available on the market since they affect how well the tyre performs under various conditions.
These tyres are referred to as “symmetrical” since the inside and exterior patterns of the tyre are identical.
They are more affordable because you don’t need to buy four different sets of tyres for your car because the multi-directional lines may be installed anywhere on the vehicle.
Asymmetric tyres have a unique pattern on the inside and exterior that enables them to function effectively in both dry and wet circumstances.
Asymmetric tyres can cost a little bit extra, though, because they must face a specific direction when put onto your car’s wheel.
Directional Tyres have arrow-like shapes that perform incredibly well in slick circumstances because the arrows effectively conducts water through the tread and displaces it. This provides excellent traction, particularly in slick weather, but, like asymmetric tyres, it must be mounted so that each tyre faces the same direction, which will be different on each side of the vehicle. In conclusion, multi-directional tyres are the greatest option if you’re on a tight budget because they provide good value for the money, perform adequately in a variety of conditions, and are simpler to replace separately. When preparing for rainy weather, directional tyres provide the maximum traction, but because you can only position them all facing one direction, they can be more expensive. The greatest all-around tyres are asymmetrical tyres, which are slightly more expensive due to their performance.
The demands of driving in various environments and under various loads must be met by tyres. For instance, a completely loaded Ford Transit van will weigh far more than a fully loaded Vauxhall Corsa. Each vehicle’s tyres must be able to handle these various stresses.
Summer tyres are made to function in largely dry, warm environments. Summer tyres can be built from a softer, more elastic rubber composition because the rubber doesn’t need to be as thick to prevent splitting in cold climates. In order to maximise contact with the road, they frequently have a tread pattern with few grooves; this enhances handling and improves fuel efficiency during the warmer months.
In order to provide increased traction on icy, snowy surfaces, winter tyres have a high groove ratio. A smooth tyre surface prevents water from draining from the wheels, which can cause aquaplaning, a total loss of traction that can result in accidents. Additionally, their tyre formula has more natural rubber to prevent it from freezing and hardening (which in turn leads to splitting).
These tyres work well in areas with all-year-round temperate conditions (such as the UK). The designers of the tyres can design them to match both wet and dry circumstances within a suitable temperature range because they do not have to withstand extreme extremes. Additionally, since you won’t need to replace your tyre sets twice a year, they have the financial advantage of saving you money.
Run-flat tyres are essentially ordinary tyres with an inside wall that has been reinforced. Because of this, they can operate for a longer time after getting a puncture (allowing you time to get to a garage) and also lower the possibility of a tyre blowout.
These tyres are made to fit SUVs and 4x4s. They are notably capable of handling off-road use, have a robust design to support heavier loads, and use tyre tread patterns that provide excellent traction on slippery surfaces and inclination slopes.
Van and LCV owners will probably need to install “commercial” tyres on their vehicles. This is due to the fact that van tyres must be able to support the added weight of tools, equipment, and passengers. The tyres themselves will have a “C” marking to denote “commercial” use and provide excellent longevity in addition to improved grip.
Our tyres are in matching pairs, and fully pressure tested. We recommend Matching Pairs where possible. We always have these in stock.We are so confident that you will be completely satisfied with the Tyres you buy from Part Worn Tyres Braintree that we offer our customers an amazing100% satisfaction guarantee.